Skip to Main content Skip to Navigation
Journal articles

Study of engine performance, emission and combustion characteristics fueled with diesel-like fuel produced from waste engine oil and waste plastics

Abstract : Utilizing oil extracted from waste engine oil and waste plastics, by pyrolysis, as a fuel for internal combustion engines has been demonstrated to be one of the best available waste management methods. Separate blends of fuel from waste engine oil and waste plastic oil was prepared by mixing with diesel and experimental investigation is conducted to study engine performance, combustion and exhaust emissions. It is observed that carbon monoxide (CO) emission increases by 50% for 50% waste plastic oil (50WPO:50D) and by 58% for 50% waste engine oil (50WEO:50D) at full load as compared to diesel. Unburnt hydrocarbon (HC) emission increases by 16% for 50WPO:50D and by 32% for 50WEO:50D as compared to diesel at maximum load. Smoke is found to decrease at all loading conditions for 50WPO:50D operation, but it is comparatively higher for 50WEO:50D operation. 50WPO:50D operation shows higher brake thermal efficiency for all loads as compared to 50WEO:50D and diesel fuel operation. Exhaust gas temperature is higher at all loads for 50WPO:50D and 50WEO:50D as compared to diesel fuel operation.
Document type :
Journal articles
Complete list of metadata

https://hal-uphf.archives-ouvertes.fr/hal-03450001
Contributor : Kathleen Torck Connect in order to contact the contributor
Submitted on : Thursday, November 25, 2021 - 5:37:47 PM
Last modification on : Friday, November 26, 2021 - 3:45:39 AM

Identifiers

Collections

Citation

V. Edwin Geo, Ankit Sonthalia, Fethi Aloui, J. Femilda Josephin. Study of engine performance, emission and combustion characteristics fueled with diesel-like fuel produced from waste engine oil and waste plastics. FRONTIERS OF ENVIRONMENTAL SCIENCE and ENGINEERING, 2018, 12 (4), ⟨10.1007/s11783-018-1063-6⟩. ⟨hal-03450001⟩

Share

Metrics

Record views

3