W. Abramowicz and T. Wierzbicki, A KINEMATIC APPROACH TO CRUSHING OF SHELL STRUCTURES, SAE Technical Paper Series, 1979.

W. Abramowicz, The effective crushing distance in axially compressed thin-walled metal columns, International Journal of Impact Engineering, vol.1, issue.3, pp.309-317, 1983.

W. Abramowicz and N. Jones, Dynamic axial crushing of circular tubes, International Journal of Impact Engineering, vol.2, issue.3, pp.263-281, 1984.

]. W. Abr-84b, N. Abramowicz, and . Jones, Dynamic Axial Crushing of Square Tubes, Int. J. Impact Engng, vol.2, pp.179-208, 1984.

W. Abramowicz, S. Imielowski, and O. W. Asowski, Quasi-Static Crushing of Multi-Corner Metal Column (in Polish), pp.208-56, 1984.

W. Abramowicz and N. Jones, Dynamic progressive buckling of circular and square tubes, International Journal of Impact Engineering, vol.4, issue.4, pp.243-270, 1986.

W. Abramowicz and T. Wierzbicki, Axial crushing of foam-filled columns, International Journal of Mechanical Sciences, vol.30, issue.3-4, pp.263-271, 1988.

W. Abramowicz and T. Wierzbicki, Axial Crushing of Multicorner Sheet Metal Columns, Journal of Applied Mechanics, vol.56, issue.1, pp.113-120, 1989.

W. Abramowicz, Preface: 4th Polish Congress of Mechanics and the 23rd International Conference on Computer Methods in Mechanics, 3RD NATIONAL CONFERENCE ON CURRENT AND EMERGING PROCESS TECHNOLOGIES ? CONCEPT 2020, pp.14-17, 2020.

W. Abramowicz, On the Development and Implementation of Superbeam Element, 1991.

O. P. Agrawal and A. A. Shabana, Application of deformable-body mean axis to flexible multibody system dynamics, Computer Methods in Applied Mechanics and Engineering, vol.56, issue.2, pp.217-245, 1986.

J. Anceau, P. Drazetic, and Y. Ra-v-alard, Comportement des Rotules Plastiques dans les Systèmes Multi-Corps, pp.30-33, 1992.

J. Anceau, Contribution au Développement d'une Méthodologie Simplifiée de Détermination des Courbes Caractéristiques du Comportement Bidimensionnel, Modèles Cinématiques en Flexion, 1994.

, Répartition de l'aide, La gestion de l'aide, pp.57-70, 2011.

]. Anc-94b, E. Anceau, P. Markiewicz, Y. Drazetic, and . Ravalard, Modélisation 2D Multi-Corps Rigides : Etude du Comportement en Collision d'une Structure de Cabine de Conduite Ferroviaire, Mécanique, Matériaux, Electricité (GAMI)

R. J. Antoun, P. B. Hackert, M. C. O's;leary, and A. Sitchin, Vehicle Dynamic Handling Computer Simulation - Model Development, Correlation, and Application Using ADAMS, SAE Technical Paper Series, 1986.

J. M. Alexander, AN APPROXIMATE ANALYSIS OF THE COLLAPSE OF THIN CYLINDRICAL SHELLS UNDER AXIAL LOADING, The Quarterly Journal of Mechanics and Applied Mathematics, vol.13, issue.1, pp.10-15, 1960.

N. Aya and K. Takahashi, Energy Absorption Characteristics of Vehicle Body Structure, Transactions of the Society of Automotive Engineers of Japan, issue.7, 1974.

B. Budiansky and J. W. Hutchinson, Dynamic buckling of imperfection-sensitive structures, Applied Mechanics, pp.636-651, 1966.

A. Cardon-a-;-b.-l, M. Carnell, and . Pramanik, Advanced Composite Airframe Program Crashworthiness Analysis by Krash, Thèse de Docteur en Sciences Appliquées, pp.38-42, 1984.

M. A. Chace and D. A. Smith, DAMN - Digital Computer Program for the Dynamic Analysis of Generalized Mechanical Systems, SAE Technical Paper Series, 1971.

D. Chang and C. Ni, Plastic Deformation Analysis, Modern Automotive Structural Analysis, pp.356-386, 1982.

D. Chevallier, J. Lebacque, and J. Mizzi, Modélisation Bidimensionnelle du Compartiment Avant d'un Véhicule au Choc, vuème Colloque Vibrations Chocs, Lyon 14-15 et 16juin, 1988.

F. Dacheux, Développement d'une Technique de Similitude Indirecte sur Modèles Réduits : Application à l'Etude du Comportement en Collision des Véhicules de Transport Guidés, 1993.

H. Dowler, T. Soanes, and E. Tuffon, Horizontal Crash Testing and Analysis of Model Flatrols, Resistance to Impact of Spent Magnox Fuel Transport Flasks, pp.135-147, 1985.

P. Drazetic and Y. Ra-v-alard, Techniques Actuelles de Simulation du Comportement en Collision de Véhicules Ferroviaires, 1988.

, Répartition de l'aide, La gestion de l'aide, pp.57-70, 2011.

P. Drazetic, A. Marissal, Y. Valard, and J. Oudin, Modèles Approchés de la Collision de Rames de Transports Guidés, pp.14-16, 1989.

P. Drazetic, Comportement au Choc de Véhicules Guidés: Contribution à la Validation de Modèles Numériques par Confrontation avec des Résultats Expérimentaux, 1990.

P. Drazetic, Y. Ra-v-alard, and A. Marissal, The 18thinternational conference on prostaglandins and related compounds montreal convention centre, montreal, canada July 26?31, 1992, Prostaglandins, vol.44, issue.1, p.2, 1992.

P. Drazetic, E. Markiewicz, and Y. Ravalard, Application of kinematic models to compression and bending in simplified crash calculations, International Journal of Mechanical Sciences, vol.35, issue.3-4, pp.179-191, 1993.

P. Drazetic, E. Markiewicz, P. Level, and Y. Ravalard, Application of the generalized mixing kinematic model to the calculation of crushing response of complex prismatic sections, International Journal of Impact Engineering, vol.16, issue.2, pp.217-235, 1995.

C. J. Dressler and R. E. Schorry, HIGH SPEED IMPACT AND AGGRESSIVITY ANALYSIS OF THE CALSPAN/CHRYSLER RESEARCH SAFETY VEHICLE (RSV), SAE Technical Paper Series, 1979.

J. Dutheil and G. Albert, Le Voilement des Plaques dans la Période Post-Critique, Construction Métallique, pp.5-39, 1976.

A. L. Florence and J. N. Goodier, Dynamic Plastic Buckling of Cylindrical Shells in Sustained Axial Compressive Flow, Journal of Applied Mechanics, vol.35, issue.1, pp.80-86, 1968.

G. Gary, Étude expérimentale du comportement dynamique des matériaux, Mécanique & Industries, vol.1, issue.1, pp.15-26, 2000.

M. Geradin, A. Cardona, and D. Granville, Numerical Simulation in the Deployement of Space Structures, Symposium on Computational Experiments at the PVP Conference organized by ASME, 1989.

G. Gerard-;-mc, G. Book-company, and I. , Introduction to Structural Stability Theory, 1962.

J. N. Goodier, Dynamic Buckling of Rectangular Plates in Sustained Plastic Compressive Flow, Proc. Symp. on Plasticity, 1968.

E. Haug and D. Ulrich, The Pam-Crash Code as an Efficient Tool for Crashworthiness Simulation and Design, Second European Cars/Trucks Simulation Symposium, 1989.

, Répartition de l'aide, La gestion de l'aide, pp.57-70, 2011.

R. J. Hayduk and T. Wierzbicki, Extensional collapse modes of structural members, Computers & Structures, vol.18, issue.3, pp.447-458, 1984.

F. Hikmat, H. F. Mahmood, and A. Paluszny, Analytical Technique for Simulating Crash Response of Vehicle Structures Composed of Bearn Elements, 1986.

R. Hill, Extremal paths of plastic work and deformation, Journal of the Mechanics and Physics of Solids, vol.34, issue.5, pp.511-523, 1986.

W. Hooker and G. Margoulis, A set of r dynamical attitude equations for an arbitrary n-body satellite having r rotational degrees of freedom, Astrodynamics Conference, vol.12, pp.123-128, 1969.

D. Hui, Design of beneficial geometric imperfections for elastic collapse of thin-walled box columns, International Journal of Mechanical Sciences, vol.28, issue.3, pp.163-172, 1986.

A. A. Il-yushin, The Elasto-Plastic Stability of Plates, NACA TM No. 1188, 1947.

J. F. Imbert, Analyse des Structures par Eléments Finis, Cepadues Editions, 1984.

W. Johnson, P. D. Soden, and S. T. Al-hassani, Inextensional collapse of thin-walled tubes under axial compression, The Journal of Strain Analysis for Engineering Design, vol.12, issue.4, pp.317-330, 1977.

N. Jones and H. L. Dos-reis, On the dynamic buckling of a simple elastic-plastic model, International Journal of Solids and Structures, vol.16, issue.11, pp.969-989, 1980.

N. Jones-;-n, W. Jones, and . Abramowicz, Static and Dynamic Axial Crushing of Circular and Square Tubes, Developments in Thin-Walled Structures-2, vol.2, pp.225-247, 1984.

N. Jones and D. Karagiozov-a, Dynamic Pulse Buckling of a Simple Elastic-Plastic Model lncluding Axial Inertia, Int. J. Solids Structures, vol.29, issue.10, pp.1255-1272, 1992.

M. Kamal and R. Labs, Analysis and Simulation of Vehicle to Barrier Impact, SAE Technical Paper Series, 1970.

A. Kaminski, Etude de la Résistance au Choc du Poste de Conduite d'une Locomotive: Essais et Calculs, pp.287-298, 1991.

T. Von, E. E. Karman, L. H. Sechler, and . Donnel, Generalized von Karman Equations for Elastic Plates Subject to Hygroexpansive or Thermal Stress Distributions, Handbook of Thin Plate Buckling and Postbuckling, 2000.

D. Kecman, Bending collapse of rectangular and square section tubes, International Journal of Mechanical Sciences, vol.25, issue.9-10, pp.623-636, 1983.

, Répartition de l'aide, La gestion de l'aide, pp.57-70, 2011.

D. Kecman, Bending collapse of rectangular and square section tubes, International Journal of Mechanical Sciences, vol.25, issue.9-10, pp.623-636, 1983.

D. Kecman, Analysis of Framework-Type Safety Structures in Road Vehicles, Structural Crashworthiness, Chap. 13, éd. N. Jones & T. Wierzbicki, Butterniorths and Co, pp.371-396, 1983.

D. Kecman, P. D. Sadeghi, M. Suthurst, and G. Mahmood-h, Prediction of Deep Bending Collapse Characteristics of Car Body Beams by Regression Analysis, 1990.

K. Kurimoto, H. Nakaya, K. Okada, ;. S. Li, and S. R. Reid, Relationship Between the Elastic Buckling of Square Tubes and Rectangular Plates, The Plastic Buckling of Axially Compressed Square Tubes, vol.57, pp.276-282, 1981.

H. E. Lindberg, Impact Buckling of a Thin Bar, Journal of Applied Mechanics, vol.32, issue.2, pp.315-322, 1965.

H. Lupker, LPG rail tank cars under head-on collisions, International Journal of Impact Engineering, vol.9, issue.3, pp.359-376, 1990.

C. L. Magee and P. H. Thornton, Design Considerations in Energy Absorption by Structural Collapse, SAE Technical Paper Series, 1978.

M. Mahendran and N. W. Murray, Local plastic mechanisms in thin steel plates under in-plane compression, Thin-Walled Structures, vol.27, issue.3, pp.245-261, 1997.

H. F. Mahmood and A. Paluszny, Design of Thin-Walled Columns for Crash Energy Managment -The ir Strength and Mode of Collapse, Proc. 4th International Conference Vehicle Struct. Mech., SAE Paper 811302, pp.7-18, 1981.

H. F. Mahmood and A. Paluszny, Design of Thin Walled Columns for Crash Energy Management ? Their Strength and Mode of Collapse, SAE Technical Paper Series, 1981.

H. F. Mahmood and A. Paluszny, Axial Collapse of Thin-Walled Cylindrical Column, Proc. 5th International Conference Vehicle Struct. Mech., SAE paper 840727, pp.45-56, 1984.

H. F. Mahmood, X. Tang, and A. Paluszny, Crash Analysis of Structures Consisting of Thin-Walled Metal Components, Computational Mechanics ?88, vol.1, pp.143-150, 1988.

H. F. Mahmood, A. Paluszny, and X. D. Tang, A 3-D Computer Prôgram for Crashworthiness Analysis of Vehicle Structures Composed by Thin-Walled Bearn Components (elements), Proc. ASME Winter Annual Meeting Anaheim Calif, pp.141-154, 1986.

, Répartition de l'aide, La gestion de l'aide, pp.57-70, 2011.

H. F. Mahmood, A. Paluszny, X. D. Tang-;-a, P. Marissal, Y. Drazetic et al., Modélisation Bidimensionnelle du Comportement au Choc des Véhicules de Transports Guidés, Congrès Français de Mécanique, vol.4, pp.209-212, 1988.

]. A. Mar-91b, P. Marissal, Y. Drazetic, and . Ra-v-alard, Comportement au Choc de Véhicules Guidés : Approches Globales et Locales, 1991.

A. Marissal, P. Drazetic, and Y. Ra-v-alard, Absorption d'Energie d'un Choc à Faible Vitesse, IXe Colloque Vibrations Chocs et Bruits, G.A.M.I., Lyon, pp.3-5, 1992.

, Collision Bidimensionnelle dans les Transports Guidés : Expérimentation et Modélisation des Risques de Chevauchement, 1993.

E. Markiewicz, G. Milcent, P. Drazetic, and Y. Ravalard, Couplage Série des Modèles Cinématiques en Compression et en Flexion, 1992.

E. Markiewicz, P. Drazetic, and Y. Ra-v-alard, Modèles Cinématiques en Compression : Calcul de l'Effort Instantané d'Effondrement, uème Congrès Français de Mécanique, vol.4, 1993.

E. Markiewicz, P. Drazetic, G. Milcent, and Y. Ravalard, Comportement au Choc des Véhicules de Transport Ferroviaire -Approche Hybride, PAM'94-PAM Users Congress, 1994.

J. Mc-gregor, D. J. Meadows, C. E. Scott, A. D. Seeds, and ;. T. Wierzbicki, Impact Performance of Aluminium Structures, Structural Crashworthiness and Failure, 1993.

I. K. Mcivor and W. J. Anderson, Dynamic Validation of a Computer Simulation for Vehicle Crash, SAE Technical Paper Series, 1977.

Q. Meng, S. T. Al-hassan!, and P. D. Soden, Plastic Hinge Approach to Vehicle Crash Simulation, Int. J. Mech. Sei, vol.25, issue.9, pp.395-400, 1983.

P. Ng and G. H. Tidbury, The Development of a Vehicle Angled Side Collision Computer Simulation Program, SAE Technical Paper Series, 1986.

Y. Ohkubo, T. Akamatsu, and K. Shirasawa, Mean Crushing Strength of Closed-Hat Section Members, SAE Technical Paper Series, 1974.

, Méthodes de Calcul des Structures pour la Résistance aux Chocs", question ORE B 165 (Résistance Dynamique aux Impacts Frontaux des Postes de Conduite), question ORE B165, vol.1, 1985.

, Editorial Board, Ore Geology Reviews, vol.3, issue.1-3, p.iii, 1988.

P. Laznicka, Ore deposit models, Ore Geology Reviews, vol.6, issue.6, pp.581-582, 1991.

N. Orlandea, D. A. Calahan, and M. A. Chace, A Sparsity-Oriented Approach to the Dynamic Analysis and Design of Mechanical Systems?Part 2, Journal of Engineering for Industry, vol.99, issue.3, pp.780-784, 1977.

F. and P. A. Yen, Qu'en est-il aujourd'hui du développement après trois années de crise ?, Coopération pour le développement : Rapport 2010, pp.21-35, 2010.

P. Culiere, E. Markiewicz, G. Milcent, and A. Tramecon, Conference Report: The 11<sup>th</sup> World Congress on Railway Research (WCRR 2016), May 29-June 2, 2016, Milan, Italy, IEEJ Transactions on Industry Applications, vol.136, issue.11, pp.NL11_2-NL11_2, 2016.

. Novembre, , 1994.

A. G. Pugsley, ON THE CRUMPLING OF THIN TUBULAR STRUTS, The Quarterly Journal of Mechanics and Applied Mathematics, vol.32, issue.1, pp.1-7, 1979.

T. Y. Reddy and S. T. Al-hassani, Axial crushing of wood-filled square metal tubes, International Journal of Mechanical Sciences, vol.35, issue.3-4, pp.231-246, 1993.

S. R. Reid, T. Y. Reddy, and M. D. Gray, Static and dynamic axial crushing of foam-filled sheet metal tubes, International Journal of Mechanical Sciences, vol.28, issue.5, pp.295-322, 1986.

S. R. Reid, Plastic deformation mechanisms in axially compressed metal tubes used as impact energy absorbers, International Journal of Mechanical Sciences, vol.35, issue.12, pp.1035-1052, 1993.

J. Rhodes-;-a.-a, R. Shabana, and . Wehage, Variable Degree-of-Freedom Component Mode Analysis of Inertia Variant Flexible Mechanical Systems, Proc.Instn Civ Engrs, vol.71, pp.371-378, 1981.

P. N. Sheth and J. J. Uicker, IMP (Integrated Mechanisms Program), A Computer-Aided Design Analysis System for Mechanisms and Linkage, Journal of Engineering for Industry, vol.94, issue.2, pp.454-464, 1972.

, Répartition de l'aide, La gestion de l'aide, pp.57-70, 2011.

J. Simo, A finite strain beam formulation. The three-dimensional dynamic problem. Part I, Computer Methods in Applied Mechanics and Engineering, vol.49, issue.1, pp.55-70, 1985.

J. Song and E. Haug, Dynamic Analysis of Planar Flexible Mechanisms, Computation Methods in A pp lied Mechanics and Engineering, vol.24, pp.359-381, 1980.

E. Z. Stowell, A unified Theory of Plastic Buckling of Columns and Plates, 1948.

A. Sutton and J. Lewis, Structural impact and crashworthiness An International Conference and Exposition to be held at Imperial College, London, U.K. July 16?20, 1984, International Journal of Engineering Science, vol.22, issue.5, p.603, 1984.

M. Tani and R. I. Emori, A Study on Automobile Crashworthiness, SAE Technical Paper Series, 1970.

R. Tassin, Méthode de Localisation des Rotules Plastiques, 1994.

S. Timoshenko and S. Woinowsky-krieger, Theory of Plates and Shells, 1969.

J. Tomassoni, Simulation of a Two-Car Oblique Side Impact Using a Simple Crash Analysis Model, SAE Technical Paper Series, 1984.

P. Tong, Rail Vehicule Structural Crashworthiness, pp.397-416, 1983.

, Règles concernant la Capacité de Résistance aux Chocs en Service des Automotrices ou des Trains Automoteurs à Moteurs à Combustion, UIC, pp.1-1

, Les procédures visant à assurer l'application des règles de protection, Fiche 617-5 OR, pp.1-1

, Voitures automobiles à vapeur construites parles établissements baldwin, Revue Générale des Chemins de Fer, vol.1998, issue.9, pp.60-63, 1998.

Y. Machefert-tassin, L?évolution et l?apport des chemins de fer secondaires en traction électrique et thermique (automotrices et autorails), Revue d?histoire des chemins de fer, issue.24-25, pp.146-174, 2002.

M. Vukobratovi? and V. Potkonjak, Dynamics of Manipulation Robots, 1982.

A. C. , Contribution au développement d'une méthodologie simplifiée d'aide au design collision des véhicules de transport pendant la phase de préconception, The Aeronautical Quarterly, vol.XX, pp.203-222, 1969.

X. Wang, Comportement à l'Ecrasement des Structures Tubulaires en Multi-Matériaux, LCB -INRETS, 1991.

T. Wierzbicki and T. Akerstrom, Dynamic Crushing of Strain Rate Sensitive Box Columns, 1977.

T. Wierzbicki, On the formation and growth of folding modes in compressed thin-walled structures, Proc. IUT AM Symposium on Collapse "The Buckling of Structures in Theory and Practice, 1982.

T. Wierzbicki and W. Abramowicz, On the Crushing Mechanics of Thin-Walled Structures, Journal of Applied Mechanics, vol.50, issue.4a, pp.727-734, 1983.

T. Wierzbicki, Crushing analysis of metal honeycombs, International Journal of Impact Engineering, vol.1, issue.2, pp.157-174, 1983.

T. Wierzbicki and W. Abramowicz, Quasi-static progressive crushing, Manual of Crashworthiness Engineering, vol.1, 1987.

T. Wierzbicki and W. Abramowicz, Theoritical foundations, Manual of Crashworthiness Engineering, vol.1, 1988.

T. Wierzbicki and W. Abramowicz, The Mechanics of Deep Plastic Collapse of Thin Walled Structures, Structural Failure, pp.281-329, 1989.

T. Wierzbicki, L. Recke, W. Abramowicz, T. Gholami, and J. Huang, Stress profiles in thin-walled prismatic columns subjected to crush loading-II. Bending, Computers & Structures, vol.51, issue.6, pp.625-641, 1994.

T. Wierzbicki, Failure and Post-Failure Behavior of Box Columns, Inelastic Solids and Structure, pp.385-403, 1990.

T. Wierzbicki and J. Huang, Initiation of plastic folding mechanism in crushed box columns, Thin-Walled Structures, vol.13, issue.1-2, pp.115-143, 1992.

T. Wierzbicki, S. U. Bhat, W. Abramowicz, and D. Brodkin, Alexander revisited?A two folding elements model of progressive crushing of tubes, International Journal of Solids and Structures, vol.29, issue.24, pp.3269-3288, 1992.

T. Wierzbicki and W. Abramowicz, CRASH-CAD - A Computer Program for Design of Columns for Optimum Crash, SAE Technical Paper Series, 1990.

S. Yamaguchi, H. Kato, and T. Osaki, Side Rails Faulted for Acute Care Bed Recall, Biomedical Safety & Standards, vol.33, issue.1, p.3, 2003.

T. X. Yu and F. L. Chen, The large deflection dynamic plastic response of rectangular plates, International Journal of Impact Engineering, vol.12, issue.4, pp.605-616, 1992.

, Répartition de l'aide, La gestion de l'aide, pp.57-70, 2011.