Skip to Main content Skip to Navigation
Book sections

Two-Dimensional Modeling of the Entire Glass Sheet Forming Process, Including Radiative Effects

Abstract : The entire glass sheet forming process consists of heating and forming a glass sheet and cooling and tempering it afterwards. For the first step, the glass sheet is heated using a local radiative source and deforms by sagging. In the thermo-mechanical calculations, temperature dependent glass viscosity, heat exchange with the ambient air and radiative source effects should be considered. A two-dimensional finite element model with plane deformation assumptions is developed. Using the P1-Approximation, the formulation and numerical resolution of the Radiative Transfer Equation (RTE) are performed on the glass domain as it changes over time to estimate the flux of the radiative body at each position in the glass. In the next step, the sheet is cooled. Narayanaswamy's model is used to describe the temperature dependent stress relaxation and the structural relaxation. The RTE is again solved using the P1-Approximation to consider the internal radiative effects during the cooling. There is a discussion using the P1-Approximation and comparing the results to other existing methods for the temperature changes of the glass throughout the forming process, for the deformed shape at the end of the forming step and for the residual stresses after tempering
Document type :
Book sections
Complete list of metadata
Contributor : Mylène Delrue Connect in order to contact the contributor
Submitted on : Tuesday, May 10, 2022 - 10:08:45 AM
Last modification on : Wednesday, May 11, 2022 - 3:47:57 AM




Fabien Béchet, Norbert Siedow, Dominique Lochegnies. Two-Dimensional Modeling of the Entire Glass Sheet Forming Process, Including Radiative Effects. 74th Conference on Glass Problems, John Wiley & Sons, Inc., pp.147-162, 2014, Ceramic Engineering and Science Proceedings, 978-111893297-1. ⟨10.1002/9781118932964.ch15⟩. ⟨hal-03663337⟩



Record views